Gluvit barrier coat seals and protects hulls and decks. Provides superior protection for fiberglass,wood,aluminum and steel. Seals leaky seams and rivets in aluminum hulls, and leaks around fiberglass cabins or decks. Hard protective coating flexes with hull movements to bridge and seal hairline cracks. Gluvit fills minor cracks and pinholes. Its long working time allows penetration into cracks to seal and strengthen. Acts as a barrier coat to minimize water absorption and galvanic corrosion. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking and molding. Gluvit hardens overnight. Allow 48 hours at 72 degrees for maximum strength. Working time and cure will be longer at lower temperatures,shorter at higher temperatures. Note: If ambient temperature is below 50 degrees Fahrenheit, pre-condition Gluvit and work area to at least 55 degrees Fahrenheit. Gluvit can be painted after fully cured.

 PROP 65 WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov